Pasta machines or pasta makers and other studio equipment and lighting for artists and crafters.



Polymer Clay Express Clay Extruder
COPYRIGHT and PATENT PENDING---all parts and accessories



PCE 2" M-Extruder - All Metal - $68.00
Extruder, metal barrel and two discs for flower quilt pattern


Buy Both and Save!! Metal Extruder and 1" Barrel Just $88




PCE 2" Aluminum Extruder - $55.00
Extruder, aluminum barrel and two discs for flower quilt pattern.

Buy Both and Save!! Aluminum Extruder and 1" Barrel Just $70


NEW!!! Cordless Extruder

Extrude Clay with a Touch of a Button!
$375.00


The PCE Extruder is going to be your favorite tool!


The PCE Extruder is perfect for extruding shapes for canes that can easily piece together just like a puzzle.

The PCE Extruder is also perfect for creating beads. Extrude a length of clay in the shape of the disk you've inserted, and cut it to the size and thickness of your desired bead.

The PCE Extruder is a heavy-duty extruder, specially designed for the viscosity of polymer clay with a 26 thrust capacity in the trigger. You can extrude as much as a pound of conditioned clay in the 2 inch barrel.

The designer discs are laser-cut 3/8" acrylic, and most are available in both the 2" size and the 1" size to be used with the Small Barrel Extruder Accessory shown below. A wide variety of shapes are available, including our fabulous new "mouldings" shapes for framing cabochons, pins, bookplates, dollhouse miniatures, etc. and our new double-hole extrusion discs for making beads and bracelets with the holes already built in. Select shape discs separately below.

Each PCE Extruder comes with 2 floral design disks.
Floral Disks

PCE Extruder Instruction Sheet, Page 1
PCE Extruder Instruction Sheet, Page 2

NEW!!! Polymer Clay Express Extruder Instruction Video

In this section and the one that follows, you will find links to see short movie clips of the extruder assembly, clay loading, examples, small barrel accessory assembly, and use of the bead corer. These are only samplings of what you will see in the full video. Artist Mari O'Dell teaches you how to use your extruder in great detail, so that you can get the best results and enjoyment from your new tool. The video is approximately 40 minutes long.

PCE Extruder Instruction Video - $12.50

Click here to see a video clip from the PCE Extruder Instruction Video, showing the extruder assembly.

Click here to see a video clip from the PCE Extruder Instruction Video, showing the loading of the clay into the extruder.

Click here to see a video clip from the PCE Extruder Instruction Video, showing examples of things made with the extruder.

Brand New Just Released Videos from the Extruder Series
Boxes, Bangles, and Beautiful Focal Beads
with Mari O'Dell

Using the PCE extruder, Mari enhances her treasure box with a bezel shape and molded design elements. She creates easy bangle bracelets with a small "general shape disk" and the PCE coring tool. Finally, she creates large focal beads and pendant elements using large "double-hole disks" and molded clay accents.

$25.00 DVD    


Boxes, Bangles, and Beautiful Focal Beads

Running time: 75 minutes


Extruding Polymer Clay Canes
with Cindy Beljan

See how easy it is to make intricate and complicated canes by using the PCE extruder and various design disks.

$25.00 DVD    


Extruding Polymer Clay Canes

Accessories for the Polymer Clay Express Clay Extruder
Small Barrel PCE Extruder Accessory

The Small Barrel PCE Extruder Accessory has a 1" interior diameter and works with the PCE Extruder (above). It fits inside the 2" barrel to extrude small shapes for canework, beads, mosaics, frames, etc. Easily extrude almost a half-pound of clay at a time.

Small Barrel PCE Extruder Accessory Instruction Sheet, Page 1
Small Barrel PCE Extruder Accessory Instruction Sheet, Page2

Click here to see a video clip from the PCE Extruder Instruction Video, showing the assembly of the small barrel accessory.

Small Barrel Extruder Accessory

Small Barrel PCE Extruder Accessory - $25.00
(does not include the PCE Clay Extruder or any design disks)

Bead Corer PCE Extruder Accessory

Bead Corer PCE Extruder Accessory

Bead Corer Instruction Sheet, Page 1
Bead Corer Instruction Sheet, Page 2

Click here to see a video clip from the PCE Extruder Instruction Video, showing the use of the bead corer.

Coring Disks

These disks are specially made to be used with the Small Barrel Extruder Accessory and the Bead Coring Tools to make polymer clay cording or tube beads. When used with the cooresponding coring tool, the interior walls of the extrusion will be approximately 1/8 inch thick.

The Bead Corer Accessory works with any disk that has a single, centered shape cut-out in the disk.

Available in sizes 1mm, 1.25mm, 2.5mm, 3.75mm, 5mm, and 6mm. The sizes are etched on the base.

Order Individual Bead Corer Accessories - $15.00/ea
Qty:
Qty:
Qty:







Coring Disks - $2.50/ea
Note that these disks are for the 1" barrel only.
Qty:
Qty:
Qty:

Click to add selected bead corers and coring disks to your cart:

Table Holster

Table Holster

Table Holster - $32.00
Allows you to push down against your table to extrude clay and gives you more leverage.

EZ Extruder Table Stand With Lever

EZ Extruder Table Holster

EZ Extruder Table Stand With Lever - $48.00
Made by ArtWay Tools

How cool is this? Use the lever to extrude clay! No more upper arm workouts!


Click Here for clamp instructions.

Adapter Disk Set - $8.00

Adapter Disk Set

Adapter allows you to use design disks from other manufacturers with the PCE Small Barrel PCE Extruder Accessory

Lifter Disk Sets $4.00

Small Lifter Disk
Small Lifter Disk Set

Large Lifter Disk
Large Lifter Disk Set

Angle Jig Kits I & II -$45.00 each
Make Fabulous Bracelet Designs with the Artway Angle Jig Kits!
Angle Jig Kit

Angle Jig I has narrow angles, and Angle Jig II has the wider angle. Each set comes with two clamps, 2 shaped aluminum blanks, 1 Jig, and the directions sheet.
Both can be used with either size extruded shape 1 inch or 2 inch Extrude polymer clay using your favorite disk and then cut the tiles using the Angle Jig to create your masterpiece!

Now the re-usable blanks are already shaped, so you don't need the bracelet bender. But, if you want to use it for other blanks, you can buy it seperately! Click on Image to see how it works!

Angle Jig I

Angle Jig II

Design Disk Sets for the PCE Extruder Gun and the Small Barrel Accessory
Most disks are available for individual purchase at the bottom of the page.
Quilting Disc Set 1
Quilt Set 1
Quilting Disk Set 1 for the 2" barrel (9 disks) - $54.00

Quilting Disk Set 1 for the 1" barrel (9 disks) - $22.50

Quilting Disc Set 2
Quilt Set 2
Quilting Disk Set 2 for the 2" barrel (7 disks) - $45.00

Quilting Disk Set 2 for the 1" barrel (7 disks) - $17.50

Quilting Disc Set 3
Quilt Set 3
Click here for .pdf product enclosure

Quilting Disk Set 3 for the 2" barrel (4 disks) - $27.00

Quilting Disk Set 3 for the 1" barrel (4 disks) - $10.00

Circles Disc Set
Circles Disc Set
Circles Disk Set for the 2" barrel (6 disks) - $42.00

Circles Disk Set for the 1" barrel (6 disks) - $15.00

Moulding Disc Set

Moulding Disc Set
Moulding Disk Set for the 2" barrel (8 disks) - $45.00

Moulding Disk Set for the 1" barrel (8 disks) - $17.50

Classic Quilter's Pattern - Drunkard's Path 2 Disk Set

Drunkard's Path 2 Disk Set

Drunkard's Path 2 Disk Set for the 2" barrel- $12.00

Drunkard's Path 2 Disk Set for the 1" barrel- $4.00

Mari's Charm Disk Set

Extrude a length of clay through one of these disks and slice them up to use as charms or beads.

mari's charm disk sets

Mari Charm Disk Set for the 2" barrel- $45.00

Mari Charm Disk Set for the 1" barrel- $17.50

MP Disk Set

Extrude a length of clay through one of these disks and slice them up to use as charms or beads.

mp disk sets

MP Disk Set for the 2" barrel- $60.00

MP Disk Set for the 1" barrel- $20.00

Things with Wings Disk Set

Things with Wings Set

Things with Wings Disk Set for the 2" barrel (5 disks) - $34.00

Things with Wings Disk Set for the 1" barrel (5 disks) - $12.00

Mari's Asian Garden Set

Mari's asian garden set

Mari's Asian Garden Disk Set for the 2" barrel - $34.00

Mari's Asian Garden Disk Set for the 1" barrel - $12.00

Hand Disks
Sold Seperately

Hand Disks

1 Inch Small Hand Disk $2.50

1 Inch Medium Hand Disk $2.50

1 Inch Large Hand Disk $2.50

2 Inch Small Hand Disk $7.50

2 Inch Medium Hand Disk $7.50

2 Inch Large Hand Disk $7.50

Fan Disk Set

Fan Disk Set

Fan Disk Set for the 2" barrel - $42.00

Fan Disk Set for the 1" barrel - $15.00

NEW! - Double-Hole Disks for the PCE Clay Extruder - NEW!

Extrude a length of clay with double-holes built in, cut the extrusion in half, match up channels, and blend together. These disks make it easy to form bases for beautiful stretch bracelets, neckpieces, and beads quickly. Mix shapes within sets; the holes will line up with all the disks in a particular set.

Double-Hole Disks l2n and l1n

L1N Square-edge Disk for the 2" barrel - $7.50

L2N Bevelled-edge Disk for the 2" barrel - $7.50


The shapes on the L1N and L2N disks will be separated onto 3 separate disks for the 1" Small Barrel Accessory. Double-Hole Disks L1n for 1 inch barrel Double-Hole Disks L2n for 1 inch barrel

L1N Square-edge Disk Set for the 1" barrel (3 disks) - $7.50

L2N Bevelled-edge Disk Set for the 1" barrel (3 disks )- $7.50

Double-Hole 4 Disk Set

Double-Hole 4 Disk Set

DHD 2 inch Disk Set - $27.00

DHD 1 inch Disk Set - $10.00

Instructions for the DHD Set
(pdf format - Acrobat Reader Required)

Click the images below to see an example extrusion made with the disk sets.

Set 1 for the 2" barrel - $20.00

Set 1 for the 1" barrel - $6.00

Set 2 for the 2" barrel - $12.00

Set 2 for the 1" barrel - $4.00

Set 3 for the 2" barrel - $20.00

Set 3 for the 1" barrel - $6.00

Set 4 for the 2" barrel - $12.00

Set 4 for the 1" barrel - $4.00

Set 5 for the 2" barrel - $12.00

Set 5 for the 1" barrel - $4.00

Set 6 for the 2" barrel - $12.00

Set 6 for the 1" barrel - $4.00

Set 7 for the 2" barrel - $12.00

Set 7 for the 1" barrel - $4.00

Set 8 for the 2" barrel - $12.00

Set 8 for the 1" barrel - $4.00

M1 Set for the 2" barrel - $12.00

M1 Set for the 1" barrel - $4.00

M2 Set for the 2" barrel - $12.00

M2 Set for the 1" barrel - $4.00

M3 Set for the 2" barrel - $12.00

M3 Set for the 1" barrel - $4.00

Mari Set 4

M4 Set for the 2" barrel - $12.00

M4 Set for the 1" barrel - $4.00

Bracelet Set

Bracelet Set

Available as a set or individually, and only for the 2" barrel.

Bracelet Set (all 3 disks) - $20.00

Bracelet 1 Disk - $7.50

Bracelet 2 Disk - $7.50

Bracelet 3 Disk - $7.50

Large Sets of Design Disks and Individual Disks

PCE M-Extruder (2" barrel) with 40 piece General Shapes Design Disk Set - $260.00

Small Barrel PCE Extruder Accessory (1" barrel) with 40 piece General Shapes Design Disk Set - $85.00
(The $85.00 option does NOT include the extruder. It is only for the 40 1" Disk Set.)

Now Includes the 5 Pointed and 8 Pointed Star Disks!
General Shape 40 piece set
PCE M-Extruder w/40 piece General Shapes Design Disk Set - $260.00

Small Barrel PCE Extruder Accessory (1" barrel) w/ 40 piece General Shapes Design Disk Set - $85.00

Order Individual Discs for the 1" Small Barrel Accessory - $2.50/ea

Qty:
Qty:
Qty:
Qty:
Qty:
Qty:
Qty:
Qty:

Click to add selected extruder discs to your cart:

Order Individual 2" Discs for the PCE Clay Extruder - $7.50/ea

Qty:
Qty:
Qty: