Polymer clay online store - supplies, tools and accessories. Safe shopping, great prices and terrific service.


Make a cute little scrap dragon in about a half an hour!


The tools and materials are simple ones. Scrap clay, some rolled on the #1 setting, some on the #4 setting for the wings, mica powders like PearlEx or Powdered Pearls in any colors you want, a blade, a scalpel or x-acto knife, a toothpick, a blunt needle tool, something with which to texture the wings, a drop of diluent or TLS, a strip of aluminum foil and two or three glass beads.

Click on the small pictures to see enlarged versions with text on them that explain each step.

Very few supplies and tools are needed for this little project.
Nibble out the curved side of the small strip cut from the thick sheet.
Lay the egg of foil onto the thick sheet. Wrap clay around foil.
Smooth the clay into the foil and mold the extensions together.
Roll the extensions smooth, and cut off excess, leaving about 2'' at head end and 3'' at tail end of dragon.
Thicken base of tail, push neck up higher on body, fold over clay at head area.
Form head into a pointed cone shape.
Pinch a 'fin' shape out of the neck up to back of head.
Looking down on top of the head.
Blunt the nose to give him a bit of a snout.
Push the bead into the side of the head. You can line the eye cavity with silver leaf if you don't have silver paint for the beads.
Form two tiny curved worms and place them over the beads for eyelids.
Poke nostrils with the blunt needle tool and detail a mouth crease with a toothpick or sharp tool.
Position the head and neck to add personality.
Attach the spines you made earlier to the back of the dragon.
Make the legs.
On each foot, make three little indentations with the blunt needle to form four toes.
Press legs to sides of body. Add details like horns, ears, scales.
Poke holes above eyes, add horns with ears in front.
If you liked Elizabeth Kenyon's book, Song in the Silence, you might want to add a small bead for a 'soulgem' to the forehead.
Beginning the wings.
Texture the wings.
Apply mica powders to wings.
Apply mica powders to body, leaving a clear area at the top of the body to attach wings.
Attach wings to bare spots on body. Pose the wings, then check that the horns and tail are positioned where you want them. You can prop a ball of crumpled foil under the wings if you want them lifted. I cure mine for about an hour at 275º and let them cool in the oven.
Here's our little dragon, finished. You can make them a lot smaller, too. Here he is with a little friend.
And yet another friend shows up.


That's it! You have a little dragon to sit on your computer and fry away those electronic gremlins with a mighty blast. Be careful, though - legend has it that the ground turns to gold wherever the dragon sleeps! Have fun!


Your one-stop source for polymer clay and related supplies. Shop online via secure server.

Polymer Clay Express at TheArtWay Store
9890 Main Street
Damascus MD 20872
Phone: 301 - 482 - 0399
FAX: 301 - 482 - 0396

Order on line via secure server:

Or, call in orders toll-free — (800) 844-0138
11 AM - 8 PM (Eastern Time)

On The Web:
www.polymerclayexpress.com

Or visit our Java-script-free mirror site at:
www.polymerclayexpress.net



Clays
Premo! Sculpey
Sculpey Products
Studio by Sculpey Products
Kato Polyclay
Fimo Classic
Fimo Soft
Cernit
Fine Silver Clays
Kids Clay Kits
Makins Clay
Air Dry Clays

 Tools
Blades & General
Sculpting & Carving
Ten Seconds Tools
ATECO Cutters
Kemper Cutters
Jewelry
Brushes & Applicators
Soldering
Doll Making

 Molds
Judi Maddigan
Maureen Carlson
Push Molds
Assorted Molds
Textures

 Jewelry
Fun Wire
Artistic Wire
Cordage
Findings
MagLok Clasps
Colored Ball Chain
Jewelry & Beading Tools
Precious Metal Clay

 Cool Stuff!
Fabulous Fibers!
Mica Powders
Leafing Foils
Finishing Tools & Glazes
Glitters & Glitz
Embossing Powders
Printable Media
Glues & Tapes
Jacquard Assortments
Miscellaneous
Books
Polymer Clay Titles
Jewelry Titles
Paper/Stamping Titles
Design Originals - Polymer
Design Originals - Other
PolymerCAFE

 Studio
PCE Clay Extruder
Studio Equipment
Pasta Machines
Work Surfaces
OTT True-Color Lighting
Soldering
Storage Containers

 Videos
TheArtWay Studio
Mindstorm
Gameplan/Artranch
Lucky Squirrel
AbbaDabba

 Info
Search our Site
Product List - Text
Printable Price List
Order Form
Shipping Info
FAQ/General

 Fun Stuff
Sales & Specials
Mini Lessons
Bulletin Board
Fimo Color 1
Fimo Color 2 .pdf
Fimo Color 3 .pdf
 

Inks & Paints
Oil Based Paints
Acrylic Based Paints
Jacquard Kits
Watercolors
Inks, Pigment
Inks, Dye
Pens & Markers

 Stamps
ArtWay Stamps
Creative Clay Stamps
Inkums Stamp Sets
Hanko Stamps
Rollagraphs
Shapelets & Stamplets
Texture
Mold & Stamp Making
HALOS

 Paper Arts
Eyelets & Brads
Frames & Corners
Scissors & Punches
Hanko Papers
Mizuhiki Cord
Embellishments
Bookbinding











Graphics and web design © ArtWay, 2008
Your comments are welcome.